Nitroarene catalyzed oxidation with sodium percarbonate or sodium perborate as the terminal oxidant

A new catalytic oxidation method for the preparation of aromatic carboxylic acids from methyl aryl ketones is reported. The method is an alternative to the haloform reaction; it is benign and affords the desired product without production of any harmful side products. The catalytic cycle is based on the use of an electron-deficient nitroarene as catalyst with either of the two cheap and green oxidants sodium percarbonate or sodium perborate. The method gives a good yield (87%) and shows excellent selectivity when the model substrate (acetophenone) is oxidized. A series of benzoic acids of industrial interest were prepared by means of this method.     

A theoretical study of radical-only and combined radical/carbocationic mechanisms of arachidonic acid cyclooxygenation by prostaglandin H synthase

Prostaglandin H synthase catalyzes the oxygenation of arachidonic acid into the cyclic endoperoxide, prostaglandin G₂ (PGG₂), and the subsequent reduction of PGG₂ to the corresponding alcohol, prostaglandin H₂ (PGH₂), the precursor of all prostaglandins and thromboxanes. Both radical abstraction by a neighboring tyrosyl radical and combined radical/carbocationic models have been proposed to explain the cyclooxygenase part of this reaction. We have used density functional theory calculations to study the mechanism of the formation of the cyclooxygenated product PGG₂. We found an activation free energy for the initial hydrogen abstraction by the tyrosine radical of 15.6 kcal/mol, and of 14.5 kcal/mol for peroxo bridge formation, in remarkable agreement with the experimental value of 15.0 kcal/mol. Subsequent steps of the radical-based mechanism were found to happen with smaller barriers. A combined radical/carbocation mechanism proceeding through a sigmatropic hydrogen shift was ruled out, owing to its much larger activation free energy of 36.5 kcal/mol. Supplementary material is available in the online version of this article at http://dx.doi.org/10.1007/s00214-003-0476-9. Electronic Supplementary MaterialSupplementary material is available in the online version of this article at Electronic Supplementary Material: Supplementary material is available in the online version of this article at     

Photoredox‐Catalyzed Functionalization of Alkenes with Thiourea Dioxide: Construction of Alkyl Sulfones or Sulfonamides

Sulfonylation of alkenes through photoredox‐catalyzed functionalization of alkenes with thiourea dioxide under visible‐light irradiation is achieved. The reaction of alkenes, thiourea dioxide and electrophiles provides a green and efficient access to alkyl sulfones and sulfonamides. A broad reaction scope is presented with good functional group compatibility and excellent regioselectivity. A plausible mechanism involving a radical addition process with sulfur dioxide radical anion (SO₂^‐) derived from the oxidation of sulfur dioxide anion (SO₂^2–) is proposed, which is supported by fluorescence quenching experiments.     

Sterically and electrosterically stabilized emulsion polymerization. Kinetics and preparation

The principal subject discussed in the current paper is the radical polymerization in the aqueous emulsions of unsaturated monomers (styrene, alkyl (meth)acrylates, etc.) stabilized by non-ionic and ionic/non-ionic emulsifiers. The sterically and electrosterically stabilized emulsion polymerization is a classical method which allows to prepare polymer lattices with large particles and a narrow particle size distribution. In spite of the similarities between electrostatically and sterically stabilized emulsion polymerizations, there are large differences in the polymerization rate, particle size and nucleation mode due to varying solubility of emulsifiers in oil and water phases, micelle sizes and thickness of the interfacial layer at the particle surface. The well-known Smith-Ewart theory mostly applicable for ionic emulsifier, predicts that the number of particles nucleated is proportional to the concentration of emulsifier up to 0.6. The thin interfacial layer at the particle surface, the large surface area of relatively small polymer particles and high stability of small particles lead to rapid polymerization. In the sterically stabilized emulsion polymerization the reaction order is significantly above 0.6. This was ascribed to limited flocculation of polymer particles at low concentration of emulsifier, due to preferential location of emulsifier in the monomer phase. Polymerization in the large particles deviates from the zero-one approach but the pseudo-bulk kinetics can be operative. The thick interfacial layer can act as a barrier for entering radicals due to which the radical entry efficiency and also the rate of polymerization are depressed. The high oil-solubility of non-ionic emulsifier decreases the initial micellar amount of emulsifier available for particle nucleation, which induces non-stationary state polymerization. The continuous release of emulsifier from the monomer phase and dismantling of the non-micellar aggregates maintained a high level of free emulsifier for additional nucleation. In the mixed ionic/non-ionic emulsifiers, the released non-ionic emulsifier can displace the ionic emulsifier at the particle surface, which then takes part in additional nucleation. The non-stationary state polymerization can be induced by the addition of a small amount of ionic emulsifier or the incorporation of ionic groups onto the particle surface. Considering the ionic sites as no-adsorption sites, the equilibrium adsorption layer can be thought of as consisting of a uniform coverage with holes. The de-organization of the interfacial layer can be increased by interparticle interaction via extended PEO chains--a bridging flocculation mechanism. The low overall activation energy for the sterically stabilized emulsion polymerization resulted from a decreased barrier for entering radicals at high temperature and increased particle flocculation.     

The use of the DPE radical polymerization method for the synthesis of chromophore-labelled polymers and block copolymers

Two analogues of diphenylethene carrying phenanthrene (1-(9-phenanthryl)-1-phenylethene (PPE)) and anthracene (1-(2-anthryl)-1-phenylethene (APE)) units were used in radical polymerization of styrene (St) and methyl methacrylate (MMA) at 80 °C using AIBN as initiator. Because of the nature of the polymerization, the resulting polymers possess the corresponding chromophoric groups. Using the methodology of a DPE system, these labelled polymers were further used for the synthesis of block copolymers. In this way poly(methyl methacrylate)-b-poly(styrene) and poly(methyl methacrylate)-b-poly(acrylonitrile) with molar masses of 60,000-90,000 g/mol were synthesized. Incorporation of the chromophoric groups into both homo- and block copolymers was confirmed by spectral measurements.     

First organophosphorus radical-mediated cyclisations to afford medium-sized rings: eight-membered lactones and seven- and eight-membered lactams

The phosphorus based radical precursors N-ethylpiperidine hypophosphite (EPHP) and diethylphosphine oxide (DEPO) are efficient reagents for carrying out the formation of seven- and eight-membered rings. Esters and amides were successfully converted into the corresponding eight-membered lactones and seven- and eight-membered lactams in good to excellent yields.     

SYNTHESIS AND CHARACTERIZATIONS OF NEAR INFRARED ABSORBING POLYMERS

A series of near infrared (NIR) absorbing dinuclear ruthenium dicarbonylhydrazine complexes (DCH-Ru),[{Ru(bpy)_2)_2μ-DCH]~(n ) (where bpy = 2,2'-bipyridinc and n = 2, 3 or 4), were prepared. The DCH-Ru complexes areelectrochromic in the NIR region with a high absorption coefficient at 1550-1600 nm typically over 10000 M~(-1)cm~(-1). DCH-Ru complex polymers with good NIR electrochromic properties were also obtained and processed to make a device foroptical attenuation at a wavelength of 1550 nm. The potential of these DCH-Ru polymers for use in a variable opticalattenuator has been demonstrated with an attenuating power at the 1550-nm telecommunication wavelength over 7.0 dB permicron of polymer film thickness. Other classes of NIR active materials are the pentacenediquinones and the correspondingpoly(ether pentacenediquinone)s. These polymers can be electrochemically reduced to the corresponding semiquinone(radical anion) having NIR absorption within a telecom window (e. g., 1310 nm).     

Electrochemically Enabled Intramolecular Aminooxygenation of Alkynes via Amidyl Radical Cyclization

An electrochemical synthesis of oxazol‐2‐ones and imidazol‐2‐ones has been developed via 5‐exo‐dig cyclization of propargylic carbamates‐ and ureas‐derived amidyl radicals. The electrosynthesis relies on the dual function of 2,2,6,6‐tetramethylpiperidin‐ 1‐yl)oxyl (TEMPO) as a redox mediator for amidyl radical formation and an oxygen atom donor. The reactions are conducted under mild conditions using a simple setup and provide convenient access to functionalized oxazol‐2‐ones and imidazol‐2‐ones from readily available materials.     

Manganese(III) acetate mediated synthesis of 3-trifluoroacetyl-4,5-dihydrofurans and 3-(dihydrofuran-2(3H)-ylidene)-1,1,1-trifluoroacetones by free radical cyclization. Part 1

2-Trifluoroacetyl-4,5-dihydrofurans were obtained by manganese(III) acetate mediated radical cyclization of trifluoromethyl-1,3-dicarbonyl compounds (1a-c) with conjugated alkenes (2a-h). The reaction of 1,1,1-trifluoropentane-2,4-dione (1a) with propenylbenzene and 1,1-diphenyl-1-butene surprisingly yielded 3-(dihydrofuran-2(3H)-ylidene)-1,1,1-trifluoroacetones besides 3-trifluoroacetyl-4,5-dihydrofurans.     

Trifluoromethylation of Alkyl Radicals: Breakthrough and Challenges†

Trifluoromethylation of alkyl radicals is emerging as a powerful tool for C(sp³)–CF₃ bond formations. Based on the hypothesis of CF₃ group transfer from Cu(II)–CF₃ to alkyl radicals, a number of trifluoromethylation reactions have been developed, including trifluoromethylation of alkyl halides, decarboxylative trifluoromethylation of aliphatic carboxylic acids, C(sp³)–H trifluoromethylation, amino‐ and carbo‐trifluoromethylation of alkenes, etc. Challenges in this intriguing field are also discussed.